Twisted rope lanyard (K20/K20) TAKELAG

The online store “Takelag System” offers to purchase a twisted rope lanyard (K20/K20) TAKELAG. These lanyards are manufactured in accordance with the profile standard EN 358.

The polyamide rope lanyard is designed to hold a person in the workplace: supports, platforms, scaffolding, cradles, etc. 
This type of lanyard  ensures positioning of the worker, prevents possible falls, and is not intended to stop a fall, as it is not equipped with a shock absorber. It is used in combination with a strapless belt SB-1 or combined belts SH-1, SH-2, SH-3, which are equipped by a sash with side rings for attaching safety equipment.

Important!  
The lanyards can be damaged by open flames, sparks, high ambient temperatures and sharp edges of metal structures.
To work under the influence of the above risks, use chain slings or wire rope slings. 

For the commissioning of all PPE from TM TAKELAG, an Acceptance Test Report is provided free of charge.

Features:

• lanyard for holding in workplace;
• adjustable in length;
• 2 double lock connector K20 (20 mm opening);
• breaking force - 22 kN;
• total length - 1.7 m;
• approximate weight - 0.75 kg.

Quality:

• ISO 9001 quality management standard;
• certificate of compliance with EN 358, 354;
• warranty: 18 months from the date of shipment to the consumer, but no more than 24 months from the date of manufacture.

Please check with our managers for the terms of fulfillment of an individual order for non-standard products or large batches!